1.1 Product material :
Imported Japanese aluminized steel plate
1.2 Production method :
Mold punching stretch forming
1.3 The welding way :
Special welder welding
1.4 Corrosion resistance :
Excellent corrosion resistance of aluminum plate can ensure tank no rust in the life, so as to ensure that the hydraulic oil and hydraulic oil cleanliness
1.5 The electrical conductivity :
Excellent conduction performance, can effectively reduce the temperature of the hydraulic oil.
1.6 Tank internal :
Built-in diaphragm in the tank, increasing flow circulation path, can improve the effect of cooling, air separation and precipitation of impurities2. STRUCTURE
2.1 Integral fuel tanks
2.2 Separate tank
2.3 Open tank
2.4 Cosed tank
3.1 The capacity of the tank, that is, the oil level height is effective volume height 80% when the fuel tank, tank should be based on the system of fever, to calculate the heat balance principle.
3.2 Under normal circumstances, the tank has a capacity of rated flow of hydraulic system of the estimate.
3.3 Hydraulic Oil Tank YX-50L-01 : 50L,80L,120L
4. DESIGN CONSIDERATION
4.1 Suction hose and return hose should be far apart, as far as possible with a baffle between two pipes, and in order to increase the oil circulation, make the oil has enough time separation bubble, precipitated impurities, dissipate heat. Three-quarters of the baffle height for the best overall height of oil level.
4.2 The fuel tank of the return pipe should be located in the oil under the surface, in order to avoid the oil return oil shocks in oil tank liquid level, make the oil inside the bubble, cause cavitation, adverse effects of hydraulic system.
5. PRODUCT ADVANTAGE
5.1 High anticorrosion performance
5.2 Good heat dissipation
5.3 Good filtering effect and high cleanliness
5.4 Structure optimization of impurity separation effect is good
5.5 Compact structure suitable for vehicle
5.6 Return filter is with big flow rate, pressure loss≤ 0.5 Mpa, high-rating glass fiber element is adopted with high filtration efficiency, β10≥200, β5≥200.
5.7 Pre-pressuring air filter makes oil tank under positive pressure status to reduce foaming phenomenon in return oil tank, reduce the bubbles in oil and corrosion phenomenon of oil
新乡东风过滤科技有限公司 主要研发生产各种过滤器，液压过滤器，回流过滤器，线路滤波器，空气过滤器，双过滤器，吸滤器，高压过滤器，滤油车（过滤车），油清洗机，空气净化设备和过滤器 脱水设备和各种试验台，包括泡沫机，颗粒计数器，多通试验台。 我们的客户有福田洛沃，徐工，顺德，斗山，三一等。 大型机械设备企业，还提供广泛的液压过滤器，液压元件，分配器，制动泵，多通阀等产品。
地址: No.42, West of Beigan Road, Xinxiang, Henan, China (mainland)